Festool Planer EHL 65 E - 574549
This part has been discontinued and is no longer available from the manufacturer.
Both versions of the EHL 65 Planer are scheduled for discontinuance, effective October 31, 2013, including T-Loc version (574549) and the Sys-Classic style (574543), with no plans for replacement.
Features & Benefits.
High Efficiency Dust Extraction
Planers produce more chips and dust than most other tools. One of the fundamental design principles for Festool power tools is consideration for highly effective dust extraction. Effective dust collection saves you time normally spent for clean up and time is money.The EHL 65 can be combined with the Festool line of CT Series dust extractors. Festool recommends the CT 22 or 33 with a 36mm hose to best handle the amount of chips produced by the EHL 65.
One-Handed Operation
The ergonomic handle combined with well-balanced design of the EHL 65 planer means that you can operate it with only one hand. This allows you to secure the material with your other hand.The EHL 65 planer weighs only 5.3 pounds which means it can be used in horizontal or vertical applications with greater control. The slim body design with a low center of gravity offers a planing width of 2-9/16" which is perfectly suited for planing and scribing edges.
13' Power Cable
At the end of your rope? Not with the EHL 65 planer that comes standard with an extra long 13-foot power cable. The EHL has plenty of extra cord length to handle passes down a long piece of material.
Flexible Dust Extraction Port
The dust extraction port can be used on the left or right side, depending on your working position, so that it does not get in the way. The simple convenience helps you work optimally and more ergonomically.
Power Switch Lock Out
Work safer with an integrated power switch lock out button. The lock out button prevents accidental triggering of the tool.
Chatter-Free Cuts
The superior blade design and configuration on the EHL 65 planer results in smooth cuts that are glue or finish ready. Save time by not having to sand the material after planing. You will be amazed by the quality of the cuts produced by the EHL 65.
Depth Adjustment In 1/256" Increments
Use the large, conveniently placed depth adjustment knob to control the depth of cut in 1/256" increments. The EHL 65 planer provides a maximum depth of cut of up to 5/32" and a maximum rabbeting depth of 29/32".
Cutter Guard
The side cutter guard on the EHL 65 planer swings upward as the depth of the rabbet increases to keep the cutter blade safely hidden.
Parallel and Rabbet Depth Stops
The EHL 65 planer comes standard with a parallel guide which can be attached to the front of the planer without tools. The parallel guide provides additional support and guidance against the edge of the workpiece. The optional rabbet depth stop (488 543) can also be attached to the front of the EHL 65 without tools. Use the rabbet depth stop to set repeatable rabbet depths up to 29/32".
Single-Knife Cutterhead
The spiral cutterhead design with replaceable cutting knife offers a smooth, chatter-free cut. The simple design of the cutterhead allows the blade to be replaced in seconds with no need for adjustment. The spiral, or angled offset, of the blade produces a smoother cut than a traditional perpendicular configuration. This also reduces the noise level creating a more comfortable working environment.
On-board Wrench Storage
The wrench used for replacing blades on the EHL 65 is conveniently stored in the rear of the tool. Avoid being miles from your shop and realizing that you don't have the proper hex key. Just one more way you can work smarter with Festool.
Machined Base Plate with Chamfer Groove
The solid, machined, one-piece base plate on the EHL 65 features a groove in the center, which can be used for creating chamfer cuts. Use the depth control knob to control the size of the chamfer in 1/256" increments. A kick stand is located on the rear of the tool to keep the blade from making contact with a surface when it is not in operation.
The Dust Extraction Difference
To truly appreciate the dust extraction capabilities of the EHL 65 when combined with a Festool dust extractor, you need to see the amount of chips and dust that is produced when not using dust extraction. The photo above shows the result of planing without dust extraction. Festool owners enjoy the pleasure of working in a near-dust free environment.<strong>Festool recommends the CT 22 or 33 with a 36mm hose to best handle the amount of chips produced by the EHL 65.</strong>
| Buy Together | No |
|---|---|
| Ship Free | Yes |