makita

Makita HR4001C - 1-9/16" Rotary Hammer; Accepts SDS-MAX Bits

$0.00
In Stock
SKU
HR4001C
Obsolete

Discontinued
Increased Power with Reduced Vibration
  • Powerful 11.0 AMP motor; 1,350-2,750 BPM to handle the most demanding applications
  • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
  • Soft start suppresses start-up reaction for more control and better accuracy
  • Variable speed control dial enables user to match the speed to the application for greater versatility
  • L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
  • L.E.D. power light indicates switch failure or cord damage
  • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
  • Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts, resulting in up to 50% more drilling efficiency
  • Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
  • Automatic brush cut-off protects commutator from damage for longer tool life
  • 2-mode operation for "Hammering Only" or "Hammering with Rotation"
  • Lock-on slide switch for continuous operation ("Hammering Only" mode)
  • Externally accessible carbon brushes for greater serviceability
  • Ergonomic soft grip provides more comfort and control
  • 16.4 ft. jobsite cord for greater versatility and instant power
  • Accepts SDS-MAX bits
More Information
On OfferNo
Buy TogetherNo
Ship FreeNo
Write Your Own Review
You're reviewing:Makita HR4001C - 1-9/16" Rotary Hammer; Accepts SDS-MAX Bits
Compatibility
  1. Makita Rotary Hammer
© Copyright 2026. MMToolParts.com All Rights Reserved.