213591-4 O Ring - Makita

$6.00
In Stock
SKU
213591-4
Authorized Dealer OEM
×

Know Before You Order

Part number 213591-4 is an O Ring 14 BHX2500 . This is an Original OEM Makita Part.
O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. Of the many causes for O-Ring failure, the most common among power tools are: Extrusion and Nibbling – The O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny “bites” from the o-ring, or caused by clearance gaps. Abrasion – One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that is too rough, contains grit or is too smooth to allow lubrication. Over Compression – The O-ring is flattened on both sides and may have a “ring” split along its length. Commonly caused by excessive pressure or heat. Heat Hardening – The O-ring has a pitted or cracked surface, and is often flattened on both sides. Caused by temperature exceeding o-ring capacity. Weather/Ozone Cracking – The O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching (greater that 5%) causes similar cracking. Classification: Part Weight: 0.01 lbs. Shipping: Ships Worldwide
More Information
On OfferNo
Buy TogetherNo
Ship FreeNo
Write Your Own Review
You're reviewing:213591-4 O Ring - Makita
© Copyright 2026. MMToolParts.com All Rights Reserved.