dewalt

ACG-45 O-ring - DeWalt

$5.85
In Stock
SKU
ACG-45
Authorized Dealer OEM
×

Know Before You Order

ACG-45 O-Ring, Mac1200 - Makita
O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. There are many causes for O-Ring failure. The most common among power tools are: • Extrusion and Nibbling – The O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny “bitesâ€ from the o-ring, or caused by clearance gaps. • Abrasion – One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that it too rough, contains grit or is too smooth to allow lubrication. • Over Compression – The O-ring is flattened on both sides and may have a “ringâ€ split along its length. Commonly caused by excessive pressure or heat. • Heat Hardening – The O-ring has a pitted or cracked surface, and is often flattened on both sides. Caused by temperature exceeding o-ring capacity. • Weather/Ozone Cracking – The O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching (greater that 5%) causes similar cracking.
More Information
On OfferNo
Buy TogetherNo
Ship FreeNo
Write Your Own Review
You're reviewing:ACG-45 O-ring - DeWalt
© Copyright 2026. MMToolParts.com All Rights Reserved.