JET J-5645161 – 3HP Disc Grinder Motor
Genuine JET J-5645161 OEM replacement motor, 3HP, 220/440V, three-phase, 1,725 RPM, TEFC. Direct-fit replacement for JET J-4421-2 (577010) and J-4421-4 (577011) 20-inch disc grinders. Dual-voltage motor designed to restore factory performance. Verify electrical configuration before ordering.
Keep your JET industrial disc grinder working hard with the J-5645161 OEM replacement motor. Designed for the JET J-4421 series of 20-inch disc grinders, this heavy-duty 3HP, three-phase motor delivers the 1,725 RPM performance your machine was built around. Whether you're replacing a failed motor or restoring a trusted piece of shop equipment, this genuine JET replacement will get your grinder back to work.
Will it fit my grinder?
JET J-4421-2:
20-inch disc grinder, 220V three-phase
(Stock #577010)
JET J-4421-4:
20-inch disc grinder, 440V three-phase
(Stock #577011)
Both models specify J-5645161 in JET's original parts documentation. The motor supports both voltage configurations, but must be correctly wired for your machine's electrical supply. Confirm the motor part number and electrical requirements before ordering.
Voltage conversion: JET documents conversion between 220V and 440V operation for the J-4421 series. This requires changing the motor wiring and installing the appropriate low-voltage protection switch coil. Have a qualified electrician perform the conversion.
What are the motor's specifications?
| Manufacturer | JET |
|---|---|
| OEM part number | J-5645161 |
| Power | 3 HP |
| Electrical supply | 220/440V, three-phase |
| Motor speed | 1,725 RPM |
| Motor enclosure | TEFC — Totally Enclosed Fan Cooled |
| Drive system | Direct drive |
| Application | JET J-4421 20-inch disc grinders |
| Schematic reference | Item #78 — Motor and Trunnion Assembly |
Is this a direct-fit replacement?
Yes. For JET J-4421 grinders that specify J-5645161, this is the OEM replacement motor designed for the original mounting and drive arrangement.
Unlike belt-driven equipment, the J-4421 uses a direct-drive system. The sanding disc assembly mounts to the motor through a hub and shaft key, eliminating the need for drive belts or pulleys.
Mechanical installation involves removing the existing drive disc and hub, securing the replacement motor, and reinstalling the drive components. Proper alignment and secure mounting are essential to prevent vibration and disc wobble. Disconnect and lock out electrical power before servicing. A qualified electrician should complete electrical connections and verify correct disc rotation before the grinder returns to service.
What else should I replace?
While replacing the motor, inspect the hub, drive disc, shaft key, and mounting hardware. These components secure the sanding disc to the motor and help maintain smooth, stable operation. Worn or damaged parts can contribute to vibration, disc wobble, or an insecure drive assembly.
| Related part | When to replace |
|---|---|
|
Motor hub Part J-5645231G Item #84 · 1 required |
Replace if cracked, worn, damaged, or loose on the motor shaft. Inspect the hub's fit and condition before transferring it to the replacement motor. |
|
Drive disc Part 5645241 Item #85 · 1 required |
Replace if warped, cracked, bent, or otherwise damaged. A damaged drive disc can cause excessive vibration or wobble during operation. |
|
Motor shaft key Part 5645191 Item #81 · 7 × 7 × 30 mm · 1 required |
Replace if sheared, rounded, deformed, or excessively worn. The shaft key helps prevent the hub from slipping on the motor shaft. |
|
Clamp washer Part 5645251 Item #86 · 1 required |
Replace if bent, cracked, distorted, or unable to seat correctly. Inspect during drive disc removal and reinstallation. |
|
Motor mounting bolts Part 5645141 Item #76 · 3/8-16 × 1-1/2" · 4 required |
Replace if bent, stripped, corroded, or damaged. Undamaged original mounting hardware can generally be reused. |
Related components reference JET's original J-4421 Motor and Trunnion Assembly diagram. Older documentation identifies the motor hub as J-5645231; later documentation lists J-5645231G. Verify the correct hub part number for your grinder before ordering.
Why order from MM Tool Parts?
Your JET grinder has more work to do, and we're here to keep it running. As the leading supplier of JET replacement motors, we use our purchasing power to bring you cost-direct pricing. You get the genuine OEM motor your machine needs, with savings you can put back into your shop.
| On Offer | No |
|---|---|
| Buy Together | No |
| Ship Free | No |
| Additional Information | J-5645161 Jet Sander Motor |


