Jet JTAS-10 Tablesaw Motor 3Hp 1Ph JTAS10-131

$1,128.77
In Stock
SKU
JT9-JTAS10-131
Authorized Dealer OEM
×

Know Before You Order

The JTAS10-131 Motor is a replacement motor for the Jet JTAS-12 (RIGHT TILT)table saw. For the left tilt you will need the JTAS10L-131.

Keep your JET table saw running strong with the JTAS10-131 OEM replacement motor. Designed for compatible JET JTAS-10 and JTAS-12 tilting arbor table saws, this 3HP, single-phase motor restores factory power and performance on saws that specify this part. Whether you're replacing a failed motor or bringing a trusted shop saw back into service, this genuine JET replacement helps keep your equipment working for years to come.

Will it fit my saw?

JET JTAS-10: 10-inch tilting arbor table saw
JET JTAS-12: 12-inch tilting arbor table saw

JET manufactured these table saws with several motor configurations, including different horsepower ratings, electrical requirements, and tilt arrangements. Before ordering, confirm that your saw specifies JTAS10-131 in its original parts diagram. This motor is not interchangeable with every JTAS-series motor, including the JTAS10L-131 left-tilt motor or the 5HP JTAS12-131.

What are the motor's specifications?

Manufacturer JET
OEM part number JTAS10-131
Power 3 HP
Electrical supply 230V, single-phase
Application JET tilting arbor table saws
Drive configuration Three V-belts
Schematic reference Item #131 — Motor and Trunnion Assembly

Is this a direct-fit replacement?

Yes. For JET table saws that specify JTAS10-131, this genuine OEM replacement is designed to restore the original motor configuration without requiring a custom motor conversion.

Mechanical installation generally requires standard shop tools, including wrenches, a socket set, and screwdrivers. Installation involves securing the motor to its mounting plate, installing and aligning the motor pulley, adjusting drive belt tension, and completing the electrical connections. Disconnect the saw from power before beginning work, and have electrical connections completed by a qualified person in accordance with the manufacturer's instructions.

What else should I replace?

Replacing a table saw motor is a great opportunity to inspect the surrounding drive components. Worn belts, damaged pulleys, or loose mounting hardware can cause vibration, slipping, and premature wear. The following components are identified in the original JET JTAS-10/JTAS-12 Motor and Trunnion Assembly diagram.

Related part When to replace
Drive V-belts
Part VB-A23
Item #125 · 3 required
Replace all three together when cracked, glazed, stretched, frayed, or slipping. Installing a matched set helps maintain consistent belt tension and power transfer.
Motor pulley
Part JTAS10-127
Item #127 · 1 required
Replace if cracked, damaged, loose on the motor shaft, or excessively worn. Inspect pulley alignment when installing the replacement motor.
Motor mounting plate
Part JTAS10-126
Item #126 · 1 required
Inspect for bending, cracks, damaged mounting holes, or corrosion that could prevent the motor from mounting securely or aligning correctly.
Motor bracket
Part JTAS10-122
Item #122 · 1 required
Replace if bent, cracked, or damaged. A secure motor bracket helps maintain proper motor positioning and drive belt alignment.
Motor mounting bolts
Part TS-0051031
Item #130 · 5/16-18 × 3/4" · 4 required
Replace if threads are stripped, heads are damaged, or bolts are missing. Undamaged original bolts can generally be reused.
Flat washers
Part TS-0680031
Item #128 · 5/16" · 4 required
Replace if bent, damaged, or missing. Inspect during motor removal and installation.
Lock washers
Part TS-0720081
Item #129 · 5/16" · 4 required
Replace if flattened, damaged, or missing. These help maintain secure motor mounting.

Related parts and quantities reference the original JET JTAS-10/JTAS-12 three-belt configuration. Verify your saw's specific parts diagram before ordering additional components. Mounting hardware may generally be reused if undamaged.

Why order from MM Tool Parts?

Your JET table saw has more work to do, and we're here to help keep it running. As a leading supplier of JET replacement motors, we use our purchasing power to bring you cost-direct pricing. You get genuine OEM replacement parts for your equipment, with savings you can put back into your shop.

More Information
On OfferNo
Buy TogetherNo
Ship FreeNo
Additional InformationThe JTAS10-131: Jet JTAS-12 table saw motor is a replacement motor for the JTAS-12 table saw.
Write Your Own Review
You're reviewing:Jet JTAS-10 Tablesaw Motor 3Hp 1Ph JTAS10-131

Related products

Check items to add to the cart or
© Copyright 2026. MMToolParts.com All Rights Reserved.