6472335 Motor 5 HP Single Phase 230 V - Powermatic
Genuine Powermatic 6472335 OEM replacement motor, 5HP, 230V, single-phase, 3,600 RPM, 184C frame. Designed for compatible Powermatic Model 66 and 72A table saws. Direct-fit replacement for saws specifying part 6472335. Verify compatibility before ordering.
Keep your Powermatic table saw running strong with the 6472335 OEM replacement motor. This 5HP, 230V, single-phase motor restores factory motor performance on compatible saws that originally specify this part.
Will it fit my saw?
Powermatic Model 66: 10-inch cabinet table saw
Factory 5HP, 230V, single-phase stock numbers: 1660791K, 1660805K, and 1660814K
Powermatic Model 72A: 14-inch tilting arbor saw — compatible 5HP single-phase configurations specifying 6472335 only
The three Model 66 stock numbers above are identified as factory 5HP, 230V, single-phase configurations. The exact motor part number has not been individually confirmed against each stock number's parts diagram. These are configuration matches, not an unconditional fit guarantee.
Both model families were offered with different motor and drive configurations. Before ordering, confirm that your saw originally specifies 6472335 and matches the electrical and frame specifications below. Model 72A compatibility must be confirmed for your particular saw.
What are the motor's specifications?
| Brand | Powermatic |
|---|---|
| OEM part number | 6472335 |
| Power | 5 HP |
| Electrical supply | 230V, single-phase (1PH) |
| Listed motor speed | 3,600 RPM |
| Frame | 184C |
| Model 66 diagram reference | Item #75 in the applicable Model 66 diagram |
Is this a direct-fit replacement?
Yes, for saws that originally specify 6472335, with matching electrical, mounting, and drive specifications. Confirm the part number before treating this motor as a direct-fit OEM replacement.
This is not a universal 3HP-to-5HP upgrade. A horsepower conversion may require changes to the mounting arrangement, electrical circuit, starter, or overload protection. Matching the saw model alone does not establish compatibility.
Installation includes securing the motor, fitting and aligning the correct pulley, adjusting belt tension, and completing the electrical connections. Disconnect power before service and have a qualified technician confirm the wiring and motor protection for your saw.
What else should I replace?
While the motor is out, check your belts, pulleys, and mounting hardware. The parts below apply only to the Model 66 two-belt configuration in the referenced parts diagram. Replace components according to their condition; a motor replacement does not automatically require every related part.
| Related part | When to replace |
|---|---|
|
Drive belts Part 6077225 Item #79 · 2 required |
Replace both together when cracked, glazed, frayed, stretched, or worn, or when they continue slipping after correct tension and alignment are confirmed. Order 2 for a complete set. Mixing new and worn belts can produce uneven tension. |
|
Motor pulley Part 6807133 Item #77 · 2-groove |
Replace if cracked, if the grooves are visibly worn or damaged, or if wear in the bore prevents a secure fit on the motor shaft. Check the set screw and pulley alignment before assuming a loose pulley needs replacement. |
|
Motor pulley set screw Part 6715013 Item #78 |
Replace if missing, stripped, damaged, or corroded enough to prevent secure tightening. A damaged set screw may allow the pulley to slip on the motor shaft. |
|
Arbor pulley Part 6807132 Item #71 · 2-groove |
Replace if cracked, chipped, excessively worn, or unable to fit securely on the arbor shaft because of bore wear. Damaged grooves can accelerate belt wear; check pulley alignment during installation. |
|
Motor mounting screw Part 6718017 Item #76 |
Replace if bent, if its threads or head are stripped, or if damage or significant corrosion prevents secure tightening. Undamaged mounting hardware can generally be reused. |
Part numbers and diagram references above are specific to the Model 66 configuration shown in that diagram. Confirm all related parts separately for Model 72A saws and other Model 66 drive configurations.
Why order from MM Tool Parts?
Your Powermatic has more work to do, and we’re here to help keep it running. As the leading supplier of Powermatic motors, we use our purchasing power to bring you cost-direct pricing. Choose the right OEM motor for your saw and keep your repair focused on the parts you need. We Keep Tools Running.
| On Offer | No |
|---|---|
| Buy Together | No |
| Ship Free | No |




