(NOT AVAILABLE) LF 850 S Paint remover

The original from Metabo: the problem solver for renovation work. Saves up to 70% of time when compared to conventional working methodsFor the environmentally-friendly removal of paint and varnish from even wooden surfaces, such as stairs, doors and windowsSuitable for processing untreated woodSuitable for processing notches by virtue of lateral bladesVariably adjustable milling depthDie cast aluminium gear housing for optimum heat dissipation and durabilityCarbide reversible blade, can be used on four sides for a long service lifeExtraction possibility by means of connecting an all-purpose vacuum cleanerWith metaBOX, the intelligent solution for transport and storage The machine shown may differ in equipment and technical details depending on the configuration. Kindly pay attention to delivery scope and product description. Accessories included only if listed in the delivery scope. Characteristics Torque 2 Nm / 18 in-lbs Cutting edge cycle 80 mm / 3 1/8 " Maximum notch depth unlimited Lateral milling height 28 mm / 1 1/8 " Axial routing depth 0 - 0.3 mm // 0 - 0.012 " Radial routing depth 0.15 mm / 0.006 " Rated input power 850 W Output power 470 W No-load speed 11500 rpm Speed at rated load 7500 rpm Weight (without power cable) 2.5 kg / 5.5 lbs Cable length 4 m / 13.12 ft Vibration Planing soft wood 4.4 m/s² Uncertainty of measurement K 1.5 m/s² Noise emission Sound pressure level 95 dB(A) Sound power level (LwA) 105 dB(A) Uncertainty of measurement K 5 dB(A) 4 Carbide reversible blades Combo-spanner metaBOX 145 Extraction connector Adjusting wrench with handle