Powermatic 3520B 20x35-Inch Wood Lathe, 2HP, 1 or 3PH, 220V 1352001

The 3520B Lathe retained all the features of the prior models such as the sliding headstock, electronic variable speed with low and high speed ranges, and the spindle lock. The enhanced features include a digital RPM readout, built in spindle indexing on the head stock, and a re-designed tailstock with internal storage, chrome trimmed handwheels, and a laser etched quill which is self-ejecting. Additional features include a set of dead centers which hold a spindle for visual comparison, a two position mount for the optional bed extension, a sliding hammer knockout rod with brass tip, an attached tool caddy and a metal shelf for tool storage.

Details

• Sliding headstock with electronic variable speed and digital RPM readout for accurate speed adjustments
• Spindle lock and built in spindle indexing on the headstock for drilling hole patterns, routing flutes, and other equally spaced features
• Set of dead centers which hold a spindle for visual comparison
• Redesigned tool rest geometry allows for better chisel movement along the tool rest
• Laser etched quill is self-ejecting.
• Two position mount for the optional bed extension
• Brass tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers
• Attached tool caddy allows convenient access to centers, wrenches, etc.
• Tailstock has internal storage for additional accessories
• Chrome trimmed handwheels are ergonomic for a comfortable feel
• Standard Equipment:
• 2HP TEFC Motor
• Safety shield
• 3" face plate and face plate wrench
• 14" tool rest
• Multiple ball-bearing live center
• Brass tipped knockout rod
• Drive center
• Spindle lock
• A variable frequency drive allows this machine to run on single or three phase power 

Style (Type) Woodworking
Swing Over Bed (In.) 20
Swing Over Tool Rest Base (In.) 17
Distance Between Centers (In.) 34-1/2
Headstock Movement Full Length of Bed
Spindle Taper MT-2
Ram Travel Quill Travel 4-1/2
Spindle Threads (In. x TPI) 1-1/4" x 8 TPI
Spindle Speeds High 125-3,200; Low 50-1,200
Number of Indexing Positions 48
Centerline of Spindle to Floor (In.) 44
Bed Construction Cast Iron
Motor Power (HP) 2
Motor Phase 1
Motor Voltage (V.) 220
Motor Current (Amps) 6.2
Recommended Circuit Size (Amps.) 20